RUS

Compression closures SSK, VSSK

SSK, VSSK compression closures with locking polyethylene body for TP type cables with a capacity of 10 to 600 pairs that are not under positive air pressure.

SSK closure application

SSK, VSSK compression closures provide full water tightness and protection of splices of cores of TP type cables, which are not under positive air pressure, both with and without hydrophobic compound. The reliability of compression closures is guaranteed by the fact that the splice of the conductors is filled with a two-component gel 8882 under pressure (compression method). They can be installed in the ground, cable duct wells, collectors and tunnels.

Technical performance of SSK closure

Straight closures SSK and splitting closures VSSK.

The closure set includes:

  1. Locking polyethylene body of the closure
  2. Shield connectors 4460D, 4462
  3. Shield jumper
  4. Shield wire
  5. UY2 connectors
  6. Р3F tape
  7. Tinned copper mesh
  8. Mastic tape 2900R
  9. Plastic envelope, EZ tape
  10. Gel 8882
  11. PVC tape 88Т
  12. Mastic tape 2229

Note

In VSSK closures, the standard number of branches is three. However, when using the 4460-K kit, an increase in the number of branches is possible.

Closure installation

  • half-closures are put on cables;
  • the cable is terminated in accordance with the installation instructions;
  • cable shields are connected;
  • conductors are connected using a P3F mesh tape;
  • the splice is shielded with a copper mesh;
  • a plastic sheet in the form of an envelope is attached to the splice;
  • the envelope is filled with gel;
  • to create compression, the splice is wrapped with EZ tape;
  • polyethylene closure halves are pushed over the splice;
  • joints of the closure body are sealed with tapes 2229 and 88T.

Closure commissioning

The closure is ready for operation immediately after installation.

Closure supply

At the request of the customer can be delivered in various component options.

Ordering table

Cable capacity, pairs
Closure type
Connector type* Name
Full screen integrity restoration - эп
10
straight
UY2
Closure CCK 10(7/13)-1-эп
20
Closure CCK 20(11/20Е)-1-эп
30
Closure CCK 30(13/25)-1-эп
50
Closure CCK 50(13/25Е)-1-эп
100
Closure CCK 100(20/33)-1-эп
10
splitting
Closure BCCK 10(7/13)-1-эп
20
Closure BCCK 20(11/20Е)-1-эп
30
Closure BCCK 30(13/25)-1-эп
50
Closure BCCK 50(13/25Е)-1-эп
100
Closure BCCK 100(20/33)-1-эп
200
straight
S25
Closure CCK 200(24/52)-S25-эп
300
Closure CCK 300(24/52)-S25-эп
400
Closure CCK 400(40/62)-S25-эп
500
Closure CCK 500(40/62)-S25-эп
600
Closure CCK 600(40/62)-S25-эп
200
splitting Closure BCCK 200(24/52)-S25-эп
300
Closure BCCK 300(24/52)-S25-эп
400
Closure BCCK 400(40/62)-S25-эп
500
Closure BCCK 500(40/62)-S25-эп
600
Closure BCCK 600(40/62)-S25-эп

* Depending on the type of connector, the digit of the code in the name of the set will change.

Connector type Connector code Name of the set
UY2 1
Closure CCK 100(20/33)-1-эп
UR2 2
Closure CCK 100(20/33)-2-эп
9700
S10
Closure CCK 100(20/33)-S10-эп
4000D
S25
Closure CCK 100(20/33)-S25-эп

Order