RUS

Compression closures SSK(arm), VSSK(arm)

SSK(arm), VSSK(arm) compression closures for TP type cables with a capacity of 10 to 600 pairs that are not under positive air pressure

Compression closure application

SSK(arm), VSSK(arm) compression closures provide full water tightness and protection of splices of cores of TP type cables, which are not under positive air pressure, both with and without hydrophobic compound. The reliability of compression closures is guaranteed by the fact that the splice of the conductors is filled with a two-component gel 8882 under pressure (compression method). They can be installed in the ground, cable duct wells, collectors and tunnels.

Technical performance of compression closure

Straight closures SSK(arm) and splitting closures VSSK(arm)

The closure set includes:

  1. ArmorCast reinforcing tape.
  2. Shield connectors 4460D, 4462.
  3. Shield jumper.
  4. Shield wire.
  5. UY2 connectors.
  6. P3F tape.
  7. Tinned copper mesh.
  8. Mastic tape 2900R, PVC tape 50.
  9. Plastic envelope, EZ tape.
  10. Gel 8882.

Note

In SSK (arm) and VSSK (arm) closures, the mechanical strength of the splice is provided by ArmorCast tape. ArmorCast tape has a polyurethane layer, which forms a strong body after polymerization. These closures should be preferably used on armored cables.

Closure installation

  • half-closures are put on cables;
  • the cable is terminated in accordance with the installation instructions;
  • cable shields are connected;
  • conductors are connected using a P3F mesh tape;
  • the splice is shielded with a copper mesh;
  • a plastic sheet in the form of an envelope is attached to the splice;
  • the envelope is filled with gel;
  • to create compression, the splice is wrapped with EZ tape;
  • the splice is wrapped in ArmorCast reinforcing tape.

Closure commissioning

The closure is ready for operation immediately after installation.

Closure supply

At the request of the customer can be delivered in various component options.

Ordering table

Cable capacity, pairs
Closure type
Connector type* Name
Full screen integrity restoration - эп
10
straight
UY2 Closure CCK 10(арм)-1-эп
20
Closure CCK 20(арм)-1-эп
30
Closure CCK 30(арм)-1-эп
50
Closure CCK 50(арм)-1-эп
100
Closure CCK 100(арм)-1-эп
10
splitting
Closure BCCK 10(арм)-1-эп
20
Closure BCCK 20(арм)-1-эп
30
Closure BCCK 30(арм)-1-эп
50
Closure BCCK 50(арм)-1-эп
100
Closure BCCK 100(арм)-1-эп
200
straight
S25
Closure CCK 200(арм)-S10-эп
300
Closure CCK 300(арм)-S10-эп
400
Closure CCK 400(арм)-S10-эп
500
Closure CCK 500(арм)-S10-эп
600
Closure CCK 600(арм)-S10-эп
200
splitting Closure BCCK 200(арм)-S10-эп
300
Closure BCCK 300(арм)-S10-эп
400
Closure BCCK 400(арм)-S10-эп
500
Closure BCCK 500(арм)-S10-эп
600
Closure BCCK 600(арм)-S10-эп

* Depending on the type of connector, the digit of the code in the name of the set will change.

Connector type Connector code Name of the set
UY2 1
Closure CCK 100(арм)-1-эп
UR2 2
Closure CCK 100(арм)-2-эп
9700 S10
Closure CCK 100(арм)-S10-эп
4000D S25
Closure CCK 100(арм)-S25-эп

Order