|Optical fibre||According to ITU-T G.652.D
Single-mode (9.5/125 μm)
|Connector type||LC, FC, SC & ST|
|Polishing type||PC, SPC, UPC & APC|
|Average overall dimensions, mm||in dependence to capacitance|
|Polishing characteristics of optical connectors|
|Polishing type||Optical parameters|
|Return loss, dB||Direct loss, dB|
|PC||not more than -30||not more than 0,3|
|SPC||not more than -40||not more than 0,3|
|UPC||not more than -50||not more than 0,3|
|APC||not more than -60||not more than 0,3|
|Minimum bending radius, mm||30D|
|Operating temperature, °С||up -30 to +60 °С|
|Installation temperature, °С||up -10 to +40 °С|
|Storage temperature, °С||up -40 to +60 °С|
|Relative humidity at +35 °С, %||98|
Cable assembly are intended for use in information transmission systems on fiber optic communication lines.
Cable assembly are intended for vertically installation between floor level in landing dwelling house in ducts and wall duct, in station shafts and station cross.
Cable assembly are available in any length according to a customer requirements but not less than 3 meter.