RUS

Distribution cable KRVPM

The KRVPM cable is intended for fixed installation in buildings and structures

It is used in telecommunication and computer networks, in the frequency range up to 16 MHz, a cable with a twist other than a pair is used for signaling and control of instrumentation, in the frequency range up to 100 kHz, with an operating voltage of alternating current not exceeding 145V.

Structure
  1. Current-carrying copper conductor with a diameter of 0.4 mm, 0.5 mm or 0.8 mm;
  2. PE conductor insulation;
  3. PVC compound sheath.
The cable core design can be performed in two ways:
  • twisted single conductors;
  • conductors pre-twisted into symmetric pairs.
01
Current-carrying copper conductor with a diameter of 0.4 mm, 0.5 mm or 0.8 mm
02
PE conductor insulation
03
PVC compound sheath
01
02
03
  1. Current-carrying copper conductor with a diameter of 0.4 mm, 0.5 mm or 0.8 mm
  2. PE conductor insulation
  3. PVC compound sheath

Technical characteristics of cable

Parameters
Value
Number of pairs in cable
Number of conductors in cable
1-25
4-6
Cross-section dimensions, mm
3,0 – 15,0
3,4 – 4,2
Weight, kg/km
9,21 – 164,732 13,41 – 22,88
Operating temperature, °С
-40 to +60

Electrical specifications of cable

Parameters
Core diameter, mm
Current frequency, MHz
Normal value
Electrical resistance of current-carrying conductors, adjusted for 1 km length and temperature of 20 °С, Ohm/km (max.)
0,4
0,5
0,8
DC
150,0
96,0
36,6
Resistance unbalance of conductors in the operating pair, % (max.)

DC
3,0
Electrical resistance of conductor insulation, adjusted for 1 km length and temperature of 20 °С, MOhm*km (min.)

DC
150,0
Test voltage between conductors, V

DC
1000
Near-end crosstalk attenuation at the length of 100 m, dB (min.)

1
4
10
16
20
31,25
62,5
100
60
53
47
44
42
40
35
32
Electrical capacitance per 1 km of cable length, nF (max.)

(0,8-1,0)х0,001
56

Order