Foil Shielded LAN Cable for Outdore Installation F/UTP
Usage:
Cable for structured cable systems for indoor installation with a signal transmission frequency of up to 100MHz (Cat.5e), up to 250MHz (Cat.6).
Structure
Specifications
Documents
Outer sheath
Suspended strength element
Tinned shield wire
Aluminopolymer tape
PET film
Conductor insulation
Conductive copper conductor
| Electrical characteristics | Value | ||||||
| Number of pairs | 25 | ||||||
| Current-carrying conductor | soft cooper wire | ||||||
| Core diameter | up 0,48 to 0,51 mm | ||||||
| Twisted type | pairing | ||||||
| Minimum bending radius | 43 | ||||||
| Tensile strength, not less than, kN | 0,4 | ||||||
| Short-term crush test, kN/cm | 40 | ||||||
| Sheath type | PE1 – sheath from PE | ||||||
| PE – 1-st layer sheath made of PVC, 2-nd layer of sheath PE |
|||||||
| PE1 SC, PE SC – with steel rope | |||||||
| Operating temperature, °С | – 40…+60 °С | ||||||
| Installation temperature, °С | – 10…+50 °С | ||||||
| Cable outer diameter max, mm | 15,2 |
You may also be interested in:
Tools:
Tools:
-
Calculate Сable Binding on the Reel
Select drums for the length and diameter of your cable -
Cable configurator
Select the cable according to your requirements -
Calculate loading of the Truck
Selection of transport and calculation of its load -
Marking identificator
Choose a cable analog from any manufacturer among KCEP products