RUS

Cable terminations rek-1HH-M and rek-1HH-А-M

For 3-, 4- and 5-core cables with insulation of vulcanized (cross-linked) polyethylene for a voltage of up to 1 kV.

Technical performance

rek-1HH-М and rek-1HH-А-М – terminations are used for 3-, 4- and 5-core cables with cross-linked polyethylene insulation, for voltage up to 1 kV.

Termination set includes:

  1. Universal lugs with breakaway head manufactured by GPH;
  2. Special tapes;
  3. Armor connecting kit;
  4. Heat-shrinkable tubing and cable sleeve joints;
  5. Installation instructions.

Termination design

Core termination is carried out with the use of lugs with breakaway head.

The termination design consists of heat-shrinkable parts. The cable sheath end is sealed with a heat-shrinkable sleeve joint, on the inner surface of which hot-melt adhesive is applied. Cable conductors are protected with a heat-shrinkable insulating tube 800 mm long. The space between the lugs and the insulation of the conductors is sealed with heat-shrinkable tube with an adhesive layer.

Installation

  • cable preparation is carried out in accordance with the installation instructions for the termination.

Application

rek-1HH-М – termination is designed for outdoor and indoor termination of 3-, 4- and 5-core cables with cross-linked polyethylene insulation, with a PVC sheath (rek-1HH-AM for cables armored with steel tapes or wires*), for voltage up to 1 kV operated at ambient temperature from -50 C to + 50 C, with relative humidity up to 80%.

Characteristics

Cable terminations rek-1HH-М and rek-1HH-А-М correspond to ST TOO 143-1930-10-16-29-2012 and meet the requirements of GOST 13781.0-86.

Supply

At the customer’s request, the sets can be supplied without lugs or with lugs for crimping for copper or aluminum conductors.

Standard conductor termination length is 800 mm. The length of the conductor termination length by agreement with the customer can be increased from 450 to 1200 mm.

Example for ordering a termination with the conductor termination length of 1200 mm: rek-1HH-4-35/50-1200-M.

Example for ordering a termination with the conductor termination length of 450 mm: rek-1HH-4-35/50-450-M.

Cable type

APvVG, PvVG, APvBbShv, PvBbShv, APvVng(A)LS, PvVng (A)-LS, APvBbShng(A)LS, PvBbShng(A)-LS, APvBbShp, PvBbShp, APvBb Shpg, etc.

TABLE FOR ORDERING TERMINATIONS FOR INDOOR INSTALLATION

Rated voltage (kV) Conductor cross-section (mm²) Number of conductors in cable Designation for ordering terminations for outdoor and indoor installation Termination length, (mm), (L min)
unarmored cables cables with tape armor
up to 1
16/25
3
rek-1HH-3-16/25-M rek-1HH-3-16/25-A-M 800
up to 1 35/50
3
rek-1HH-3-35/50-M rek-1HH-3-35/50-A-M 800
up to 1 70/120
3
rek-1HH-3-70/120-M rek-1HH-3-70/120-A-M 800
up to 1 150/240
3
rek-1HH-3-150/240-M rek-1HH-3-150/240-A-M 800
up to 1 16/25
4
rek-1HH-4-16/25-M rek-1HH-4-16/25-A-M 800
up to 1 35/50
4
rek-1HH-4-35/50-M rek-1HH-4-35/50-A-M 800
up to 1 70/120
4
rek-1HH-4-70/120-M rek-1HH-4-70/120-A-M 800
up to 1 150/240
4
rek-1HH-4-150/240-M rek-1HH-4-150/240-A-M 800
up to 1 16/25
5
rek-1HH-5-16/25-M rek-1HH-5-16/25-A-M 800
up to 1 35/50
5
rek-1HH-5-35/50-M rek-1HH-5-35/50-A-M 800
up to 1 70/120
5
rek-1HH-5-70/120-M rek-1HH-5-70/120-A-M 800

* Termination sets for cable with wire armor shall be ordered separately.

Order