RUS

Cable terminations rek-1KnT-SL-M for outdoor and indoor installation

For 3- and 4-core cables with impregnated paper insulation, for voltage of up to 1 kV.

Technical performance

rek-1KnT-SL-M heat-shrinkable cable termination is used for cables armored with steel tapes with impregnated paper insulation for voltage up to 1 kV.

Termination set includes:

  1. Universal lugs with breakaway head manufactured by GPH;
  2. Mastic tapes;
  3. Heat-shrinkable tubing;
  4. Bonding kit using a solderless system, which includes a ground wire and spring rings, clamps;
  5. Heat-shrinkable cable sleeve joint;
  6. Installation instructions.

Termination design

The termination design consists of heat-shrinkable materials, the cable sheath end is sealed with a heat-shrinkable cable sleeve joint with an adhesive underlayer. Cable conductors are protected with a heat-shrinkable insulating tube 750 mm long. The space between the lugs and the insulation of the conductors is sealed with mastic and heat-shrinkable tube with an adhesive layer.

Testing

Rek-1KnT-SL-M termination is tested in accordance with GOST 13781.0-86.

Note

The length of the conductors can be determined at the installation site.
The minimum conductor length is 350 mm.

Cable type

AABG, ASBG, SBG, AABlU, ASBlU, SBN, AASHvU, AASHp, AAB2lSHvU, ASB2lSHvU, SB2lSHv, SBlU etc.

Characteristics

Cable terminations rek-1KnT-SL-M correspond to ST TOO 143-1930-10-16-29-2012 and meet the requirements of GOST 13781.0-86.

Supply

At the customer’s request, the sets can be supplied without lugs or with lugs for crimping for copper or aluminum conductors. Standard conductor termination length is 800 mm.

ORDERING TABLE

Rated voltage (kV) Number of conductors in cable Conductor cross-section (mm²) Designation for ordering terminations for outdoor and indoor installation
up to 1
3
16/25
rek-1KнT-3-16/25-CЛ-M
up to 1 3
35/50
rek-1KнT-3-35/50-CЛ-М
up to 1 3
70/120
rek-1KнT-3-70/120-CЛ-М
up to 1 3
150/240
rek-1KнT-3-150/240-CЛ-М
up to 1 4
16/25
rek-1KнT-4-16/25-CЛ-М
up to 1 4
35/50
rek-1KнT-4-35/50-CЛ-М
up to 1 4
70/120
rek-1KнT-4-70/120-CЛ-М
up to 1 4
150/240
rek-1KнT-4-150/240-CЛ-М

Order