RUS

Cable terminations rek-1KnTp-SL-nb for outdoor and indoor installation

1KnTp-SL-nb heat-shrinkable cable termination is used for cables armored with steel tapes with impregnated paper insulation for voltage up to 1 kV.
MAIN HEAT-SHRINKABLE TERMINATION INSTALLATION TECHNOLOGY

Termination set includes:

  1. Universal lugs with breakaway head;
  2. Mastic tapes;
  3. Heat-shrinkable tubing;
  4. Bonding kit using a solderless system, which includes a ground wire and spring rings, clamps;
  5. Heat-shrinkable cable sleeve joint;
  6. Installation instructions.

Termination design

The termination design consists of heat-shrinkable materials, the cable sheath end is sealed with a heat-shrinkable cable sleeve joint with an adhesive underlayer. Cable conductors are protected with a heat-shrinkable insulating tube 1000 mm long. The space between the lugs and the insulation of the conductors is sealed with mastic and heat-shrinkable tube with an adhesive layer.

Testing

Rek-1KnTp-SL termination is tested in accordance with GOST 13781.0-86.

Note

The length of the conductors can be determined at the installation site. The minimum conductor length is 350 mm.

Cable type

AABG, ASBG, SBG, AABlU, ASBlU, SBN, AASHvU, AASHp, AAB2lSHvU, ASB2lSHvU, SB2lSHv, SBlU etc.

Characteristics

Cable terminations 1KnTp-SL-nb correspond to ST TOO 41021646-29-2007 and meet the requirements of GOST 13781.0-86.

Supply

At the request of the customer, kits without lugs can be delivered. Standard conductor termination length is 1000 mm.

ORDERING TABLE

Rated voltage, kV
Number of conductors in cable
Conductor cross-section, mm2
Designation for ordering terminations for outdoor and indoor installation
Without lugs
With bolted lugs
up to 1
3
16/25
1КнТп-3-16/25-СЛ 1КнТп-3-16/25-СЛ-нб
up to 1 3
35/50
1КнТп-3-35/50-СЛ 1КнТп-3-35/50-СЛ-нб
up to 1 3
70/120
1КнТп-3-70/120-СЛ 1КнТп-3-70/120-СЛ-нб
up to 1 3
150/240
1КнТп-3-150/240-СЛ 1КнТп-3-150/240-СЛ-нб
up to 1 4
16/25
1КнТп-4-16/25-СЛ 1КнТп-4-16/25-СЛ-нб
up to 1 4
35/50
1КнТп-4-35/50-СЛ 1КнТп-4-35/50-СЛ-нб
up to 1 4
70/120
1КнТп-4-70/120-СЛ 1КнТп-4-70/120-СЛ-нб
up to 1 4
150/240
1КнТп-4-150/240-СЛ 1КнТп-4-150/240-СЛ-нб

Order