Cable for Installation in Cable Duct Systems КС-OKL
Usage:
For installation in cable ducts, pipes, blocks, collectors, on bridges and in shafts, without bending loads, in case of a risk of cable damage by rodents, in areas with the possibility of flooding for a long time, into the soils of 1-3 categories.
Structure
Specifications
Documents
Outer sheath
Steel corrugated tape
Optical loose tube
Water-blocking element
Optical fiber
Central strength element
| Code of cable type | 2025 | 2026 | 2027 | 2028 | 2036 | 2037 | |
| Number of fibers | 28 | 48 | 96 | 144 | 24 | 48 | |
| Number of loose tube | 7 | 6 | 8 | 12 | 6 | ||
| Number of fibers in loose tube | 4 | 8 | 12 | 4 | 8 | ||
| Short-term crush test, kN/cm (N/10cm) | 0,35 (3500) | 0,3 (3000) | 0,4 (4000) | ||||
| Dynamic tensile strength, not less than, kN | 2,5 | 3,0 | |||||
| Operating temperature, °С | – 40…+60 °С | – 40…+70 °С | |||||
| Installation temperature, °С | – 10…+50 °С | ||||||
| Cable outer diameter, mm | 9,9 | 11,4 | 13,5 | 17,0 | 8,5 | 9,9 | |
You may also be interested in:
Tools:
Tools:
-
Calculate Сable Binding on the Reel
Select drums for the length and diameter of your cable -
Cable configurator
Select the cable according to your requirements -
Calculate loading of the Truck
Selection of transport and calculation of its load -
Marking identificator
Choose a cable analog from any manufacturer among KCEP products